A Saltwater Fishing Community...Where There Is No BS About The Sport A Saltwater Fishing Community...Where There Is No BS About The Sport
| |||||||
| Lures, Lure Building, & Fly Tying If you use it to catch fish (or at least try), then this is the place for that. If you actually make them, then we really want to hear about your styles and successes. |
What have you got to say about the topic of: "Someone Slap Me". Here's how is started: "I saw a price I could not pass up and placed an order for some "
 |
| | LinkBack | Thread Tools | Display Modes |
01-16-2007, 10:47 AM
| #1 |
| NBS Member  Join Date: Dec 2006 Location: Bikini Bottom
Posts: 836
| Someone Slap Me I saw a price I could not pass up and placed an order for some swimmer blanks. 3663 pieces of soft maple to be exact... It's gonna get awful crowded here next week  Two full pallets!!!!  They're cut-offs from longer dowels and all 1 7/8" x 10" and 1 3/8" x 8 7/8" long and that's why the price was so good.  Now I need to make a bunch of new jigs as these are round and I was previously working with square stock.  Wait until my wife sees the bill  Just kidding of course. She told me just this morning I should get my arse in gear and commit to doing "SOMETHING!!!!!".  Wish me luck......
__________________ I really don't care what you have to say about me, just as long as you mention my name  |
|  |
|
01-16-2007, 11:04 AM
| #2 |
| NBS Member Join Date: Dec 2006 Location: NoFo
Posts: 174
| Thats why i make all my jigs able to accept almost any shape you never know.  |
|
| |
|
01-16-2007, 03:55 PM
| #3 |
| NBS Member Join Date: Dec 2006 Location: Bikini Bottom
Posts: 836
| Yes JigmakingmasterLu.... Lesson learned. BUT, Doncha think you could have offered up that little tid-bit before In all honesty, I liked the square stock for registration purposes and thought I would stick to it that way but these dowels are so much cheaper to get. It makes the lathe operation that much easier not having to knock off the corners too... I'm assuming I'll be using a lot of "V" blocks? Is there a better way to register dowels ?
__________________ I really don't care what you have to say about me, just as long as you mention my name |
|
| |
|
01-16-2007, 04:06 PM
| #4 |
| NBS Member  Join Date: Nov 2006 Location: Rhode Island
Posts: 180
| Jay, you know that center finder you gave me...flip it over and put it on a piece of round stock...run a mark and rotate about 90 and mark again...looks like center, or damn near it, to me! Hey what do I know??:confused1: |
|
| |
|
01-16-2007, 04:18 PM
| #5 |
| NBS Member Join Date: Dec 2006 Location: Bikini Bottom
Posts: 836
| No problem with finding center Doc, I need a jig to cut and cup the face of my plugs. You know, that "Odd" scoop. It's got to go through three machines and not rotate or the blank is junk. This one... 
__________________ I really don't care what you have to say about me, just as long as you mention my name |
|
| |
|
01-16-2007, 05:52 PM
| #6 |
| NBS Member Join Date: Dec 2006 Location: NoFo
Posts: 174
| Jay i posted a way you can do this on the other board with pictures for centerfinding on anything.As for the cupping i have a few things up my sleeve. |
|
| |
|
01-16-2007, 07:09 PM
| #7 |
  Join Date: Nov 2006 Location: www.atlanticoffshorelures.com
Posts: 1,140
| hey J, I'm gonna need to get a little piece of that stuff to try out. Armand |
|
| |
|
01-16-2007, 07:30 PM
| #8 |
| NBS Member Join Date: Dec 2006 Location: Bikini Bottom
Posts: 836
| Edit: thought for some reason I was talking to Doc... No problem Armand.... I'll let you know when I have it.
__________________ I really don't care what you have to say about me, just as long as you mention my name |
|
| |
|
01-16-2007, 07:33 PM
| #9 | |
| NBS Member Join Date: Dec 2006 Location: Bikini Bottom
Posts: 836
| Quote:
The elongated cup is a booger to set up.
__________________ I really don't care what you have to say about me, just as long as you mention my name | |
|
| |
|
01-16-2007, 07:43 PM
| #10 |
| NBS Member Join Date: Dec 2006 Location: NoFo
Posts: 174
| Make a nosepicking jig it gats all the boogers.  |
|
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
